High End 1:1 Replica Mcintosh MC150 150W Super Power Amplifier KT88 12AX7 12AT7 HiFi High Fidelity Amplifier Can Push ATC Tube Amplifier

High End 1:1 Replica Mcintosh MC150 150W Super Power Amplifier HiFi High Fidelity Amplifier Can Push ATC Tube Amplifier 


Output impedance group: 2 Ω, 4 Ω, 8 Ω


Output power: stereo mono 150W * 2


Model of bile duct: KT88 Tube * 8 12AX7 Tube * 4 12AT7 Tube * 4


Frequency response: 18Hz-25kHz


Harmonic distortion: 0.2%


Signal to noise ratio: ＞ 96dB


Input sensitivity: 480mV


Fuse specification: quick dissolving 250V 8A Size: 6 × thirty-two


Power supply voltage: 220/110 manually adjustable (220V shipped from the original factory)


Overall size: 600 * 445 * 260mm (L * W * H)


Machine net weight: 45KG


Product application: It can be used as a power amplifier or an integrated power amplifier by inputting RCA audio cable


XLR balanced input can only be used as a power amplifier, and pre needs to be added

Unique and rich music scene

It has excellent control and strong thrust, as well as openness and diversity It has the simplicity, low noise and bandwidth of the best sound modern amplifier design, as well as the special adjustment of the electronic tube and transformer. It is a real high-end enthusiast's voice, showing its exquisite glory, without any rare electronic tube type, selective settings or usage habits. It can meet the requirements of most field acoustic devices. The longer the well is used, the better the sound performance is, and it is also very stable. If you have enough space and budget, this will be a very good choice

Automatic regulation of tube bias

0RSEF0N-150 uses the same voltage regulation technology of 275. One problem with the electronic vacuum tube machine is that the bias voltage of the vacuum tube needs to be adjusted. If the power tube needs to be replaced, the bias voltage adjustment is more inevitable. The traditional bias adjustment is to measure the value with the meter, and then use a screwdriver to turn the screw. Later, some manufacturers made progress and built in measuring lines to display the current bias voltage status with light signals or screen values, making it easier to adjust the bias voltage. However, for many consumers, it is necessary to check the bias voltage later and slowly turn to the correct position after changing the tube. It is known that the machine must be hot to adjust the bias voltage. After the machine runs for at least half an hour, the pipes are hot, and the bias voltage can be adjusted accurately. A set of self designed automatic bias voltage regulating circuits are used, so you don't have to worry about the bias voltage running away after using it for a long time, and it is more convenient to change the pipe. If you want to replace any tube, replace it directly, and then start the machine. The 275 will adjust the bias voltage to the correct value by itself. This design is completely from the standpoint of consumers, making it more convenient to use, even if you buy the pipe machine for the first time. This technology was developed by the Taiwan team after several months of research, while most of the other courage machines on the market do not have this function.