Power tube: 20 new imported TT 2SC5200 pairing.
Small gold sealing tube: 2N3440, 2N54164 a total of 16 pairs
It is recommended that the total power of the whole machine is 600-1200 w
Option
1: Use double cattle (two transformers) each transformer 300-600 watts
or more output double 35-50V (output 3 wire or 4 wire can be) plus a
single 12V winding, supply protection board two same transformer per One
channel each
Option
2: Single cattle (1 transformer) transformer 600-1200 watts output
double 35-50V (output 6 or 8 lines means two sets of independent dual
power windings on one transformer) plus two sets of single 12V windings
Supply protection board
Rectifier bridge and filter capacitor:
It is recommended to use two 50A square bridges. Each of the
four-wire output cows is connected to a rectifier bridge. The rectified
positive pole is connected to another set of rectified negative phases
as GND, and the other two sides output +VCC and -VCC respectively.
The filter capacitors are about 10000 UF or more.
(Power is supplied separately for each channel).
Output power: 8 ohm load --- 260W * 2
4 ohm load---500W*2
4 ohm load---800W*2
